FujiFilm MX-1200, Owner'S Manual

Page: 9 / 43

16 17
1
With the LCD monitor on, you can check the
remaining charge in the battery.
➀
Battery fully charged.(No indicator displayed.)
➁
Battery charge low. Replace or recharge the
battery as it will run out shortly.
➂
The battery is exhausted. The display will
shortly go blank and the camera will stop
working. Replace or recharge the battery.
Using the AC Power Adapter
To shoot or play back images without depleting the
battery charge, use the special AC Power Adapter
AC-5V (sold separately).
Check that the camera is switched off and then plug
the AC power adapter connector into the “DC IN 5V
socket” on the camera. Then plug the AC power
adapter into the power outlet.
●
!
The socket-outlet shall installed near the equipment and
shall be easily accessible.
●
!
The shapes of the plug and socket-outlet depends on the
country of use.
●
!
Using AC power adapters other than the AC-5V could
damage the camera.
●
!
See P.71 for more information on the AC power adapter.
DC IN 5V socket
液晶モニター
表示なし
点滅
点灯
3
SWITCHING ON AND OFF
Slide the POWER switch in the direction of the
arrow to switch the camera on or off. The
viewfinder lamp lights [green] when you switch
the camera on.
Auto Power Off Function
If the camera is left switched on for two
minutes or more, the Auto Power Off function
automatically switches the camera off.
When you switch the LCD monitor on (
➡
P.25),
the standard number of shots available on the
SmartMedia is displayed.
1
●
!
To disable the Auto Power Off function, hold down
the “MENU/EXE” button as you switch the camera
on. To re-enable the Auto Power Off function, switch
the camera off and then on again.
●
!
Always switch the camera on before attempting to
use it.
●
!
The number of available shots displayed differs
depending on the type of SmartMedia you are using.
●
!
If “ ” is displayed, wipe the SmartMedia contact
area (gold-colored portion) with a soft dry cloth and
load the card again. If this does not work, you may
have to format the SmartMedia (
➡
P.58).
●
!
Because the amount of image data recorded is not
fixed and varies depending on the subject (level of
detail, etc.), the actual number of available shots
may slightly differ from the number displayed.
2
●
!
If the battery charge is depleted, you may not be
able to switch the LCD monitor on.
Blank
Flashing
On
LCD Monitor