FujiFilm MX-1200, Owner'S Manual

Page: 27 / 43

53
4
1 2
➀
Set the Mode dial to “ ”.
➁
Press the “MENU/EXE” button to display the
menu on the LCD monitor.
➂
Press “ ” to select DPOF.
➃
Select “FRAME” and press the “MENU/EXE”
button.
➀
Use “ ” or “ ” to display the frame to be
specified.
➁
Use “ ” or “
” to specify the number of
prints.
●
!
Up to 99 prints can be specified for one frame. The
maximum number of prints that can be specified for
frames on the same SmartMedia card is 999.
●
!
Multi-frame playback is an easy way to select
images to be printed (
➡
P.48).
DPOF SET FRAME
PLAYBACK MENU
52
HOW TO SPECIFY PRINT OPTIONS
With the MX-1200, you can order prints using the Digital Print Order Format (DPOF).
You can use the DPOF to specify the following:
●
The frames to be printed and the number of prints for each frame
● Imprinting of the date and time
This section gives a detailed description of how to order your prints with the MX-1200.
✽
Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽
Note that the warnings shown below may be displayed while you are specifying the
prints.
(
➡
P.75)
Frames specified for printing are automatically protected. To remove protection from
those frames, you must cancel the print specification.
(
➡
P.75)
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( ➡
P.75)
No more than 999 prints can be specified on the same SmartMedia.
PLAYBACK MENU