11
EN
Taking Pictures (Continued)
⁄
Every time you take a photo, the number on the film counter decreases
from “10” to reflect the number of remaining photos, and “0” is displayed
when you have used up the film pack.
When the film has been ejected (the camera stops making a sound), grasp
the edge of the film, then take it out.
• The developing time is approximately 90 seconds. (The time varies
depending on the ambient temperature.)
When finished using the camera, always switch the camera to “off” to
maintain battery life. If the camera is left switched “on” for 5 minutes
without being used, it will automatically switch to “off”.
When “0” is displayed on the film counter, unload the film pack following the procedure below.
Unloading a Used instax SQUARE Film Pack
~
Ÿ
Press the back cover lock down to open
the back cover.
Grasp the rectangular holes on the film pack,
then pull it out straight.
instax̲BO-11̲instbook̲14Lang.indb 11
2/2/2018 5:37:58 PM
