17
EN
TROUBLE SHOOTING
★
When to replace the batteries
1
When the lens does not work when the power is switched on.
2
When it takes an unusually long amount of time for the flash to be charged.
3
When pressing the shutter button turns off the camera.
* Replace both CR2 batteries with new lithium batteries of the same brand/type.
TROUBLE SHOOTING
During operation
Problems
Possible Causes
Solutions
The shutter release
won’t trip.
1
The battery power is low.
2
The LED on the flash suppressing
button or the self timer lamp is flashing
rapidly.
3
The film counter is showing “0” sign.
1
Replace both batteries with new batteries.
2
The flash is charging. Please wait until the LED
or lamp turns off.
3
Unload the film pack, and load a new film
pack.
The LED(s) on the
mode indicator is
flashing.
●
The camera has some trouble.
1
Remove the batteries and reinsert them with
the LED flashing.
2
If
1
does not resolve the problem, contact a
FUJIFILM authorized distributor.
The film pack won’t
load into your
camera, or won’t load
into your camera
smoothly.
1
The film pack is not for your camera.
2
You are not loading the film pack
correctly.
1
Use FUJIFILM Instant Film “instax SQUARE”
only. (No other films can be used.)
2
Match the yellow line on the film pack with
the yellow positioning mark in your camera.
Follow the FUJIFILM Instant Film “instax
SQUARE” instructions.
The film cover cannot
be ejected.
●
The battery power is low.
●
Replace both batteries with new batteries and
load the film pack again.
instax̲BO-11̲instbook̲14Lang.indb 17
2/2/2018 5:38:00 PM
