FujiFilm instax SHARE SP-3, User Manual

Page: 16 / 170

16
EN
TROUBLE SHOOTING
During printing
Problems Possible Causes Solutions
The printer cannot be
turned on. 1
The battery power is low. (The
remaining battery LED is flashing
red.)
2
The battery is not inserted correctly.
3
You did not press the POWER
button for long enough.
1
Charge the battery fully.
2
Insert the battery correctly.
3
Press and hold the POWER button for approx. 1
second
.
You entered the
password, but the device
cannot be connected to
the printer.
● The password is incorrect. ● Turn the printer on while holding the REPRINT
button to reset the password to the factory
default (1111).
You pressed the
REPRINT button, but
you cannot print. 1 No images are stored in the printer.
(The remaining film LED flashes for
3 seconds.)
2 No film remains in the printer. (All the
remaining film LEDs are flashing.)
3 The film pack is not loaded. (All the
remaining film LEDs are flashing.)
1 Transmit an image to print.
2 Load a new film pack.
3 Load a new film pack.
instax_BO-C_6lang.indb 16 instax_BO-C_6lang.indb 16 2017/9/14 15:21:13 2017/9/14 15:21:13