FujiFilm instax SHARE SP-3, User Manual

Page: 10 / 170

10
EN
⁄
Connecting and Printing (Continued)
@
Tap “Connect and print”.
When a printer is detected,
tap “Connect”. If multiple
printers are detected, select
the printer to connect from
the list.
Printer's identifier (SSID) is
located on the bottom of the
printer.
#
Enter the factory default
password (1111) or the one you
specified, then tap “OK”.
The printer starts printing.
To reset the password to the factory default
(1111), turn the printer on while holding the
REPRINT button.
When the film has been ejected (the
printer stops making a sound), grasp
the edge of the film, then take it out.
1 remaining film LED turns off every
time you print an image.
¤
Before tapping “Connect
and print”, tapping
on
the lower right displays the
edit menu. You can add
a template or adjust an
image on this menu.
Tap “Done” to exit from the
menu.
When printing, put the
printer on a steady surface
such as a desk.
㻵㻺㻿㼀㻭㼄㻙㻝㻝㻝㻝
㻝㻝㻝㻝
instax_BO-C_6lang.indb 10 instax_BO-C_6lang.indb 10 2017/9/14 15:21:11 2017/9/14 15:21:11