FujiFilm instax SHARE SP-3, User Manual

Page: 15 / 170

15
EN
SPECIFICATIONS
instax SP-3
Recording method 3-color exposure with OLED
Film FUJIFILM Instant Film “instax SQUARE” (Purchased separately)
Photo capacity 10 prints/pack
Image size 62 mm×62 mm
Supported image size 800×800 dots
Printing resolution 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels 256 levels per color (RGB)
Interface Standard compliance: IEEE802.11b/g/n
Operation frequency: 2412 MHz to 2462 MHz (11 ch)
Supported image format JPEG, PNG
Printing time Image recording - photo output (fed out): Approx. 13 sec.
Approximate printing
capacity Approx. 160 prints (Based on our test conditions)
* Varies depending on the conditions of use.
Power supply NP-50 (1 piece)
Charging time Approx. 3 hours (Varies depending on remaining battery level)
Power consumption 3 W
Operating temperature +5°C to +40°C (no condensation)
Dimensions/Weight 116 mm × 130.5 mm × 44.4 mm (excluding projections)
312 g (without battery and film pack)
Supplied accessory USB cable
(BOB711, Length: 1 m) ,
ferrite core
* Specifications above are subject to change for improvement.
instax_BO-C_6lang.indb 15 instax_BO-C_6lang.indb 15 2017/9/14 15:21:13 2017/9/14 15:21:13