xi
Product Features and Precautions for Use
Product Features and Precautions for Use
■
■
Water, Dust, and Shock Resistance
Water, Dust, and Shock Resistance
Q
The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance
standards, and has passed FUJIFILM drop tests (drop height: 1.5 m/4.9 ft.; impact surface:
plywood, thickness 5 cm/2.0 in.) compliant with MIL-STD 810F Method 516.5: Shock. These
results were obtained through in-house testing and are not a blanket guarantee of water
resistance or invulnerability to damage or destruction. The accessories supplied with the
camera are not water resistant.
■
■
Before Use
Before Use
1
Inspect the water-resistant seal and adjacent surfaces and remove
any dust, sand, or other foreign matter using a soft, dry cloth.
Q
Have the water-resistant seal replaced if it is deformed or
otherwise damaged (note that a fee is charged for this service;
contact your retailer or a FUJIFILM-authorized repair technician for
more information). Failure to replace the seal could result in leaks
and damage to the camera.
2
Holding the battery-chamber cover closed against the
camera body (
q
), rotate the latch until it clicks into place
(
w
), indicating that the cover is secure.
3
Check that the cover is secure by rotating the latch in the opposite direction and confirming
that the cover does not open.
