FujiFilm FinePix E 500, Service Manual

Page: 53 / 83

53
4. Adjustment
FinePix E500 Service Manual
4-13. [F1] : Battery Voltage Adjustment
<Setup for Flash Adjustment>
(1) When adjusting the battery voltage, supply power (3V) to the camera from the [FxE500 Batt. Jig] before setting the jig
mode.
(2) Always measure input voltage in the vicinity of the DC IN terminal.
(3) When reducing the voltage, adjust the stabilized power supply to ensure that the voltage is not reduced excessively from
the measured point. The adjustment software may produce an error if communication between the adjustment software
and the camera is disrupted. Restart the adjustment software in this case.
<Step 1>
Select [F1] Battery Voltage Adjustment on the [Adjustment Items Select] screen.
—> The [Battery Voltage Adjustment Preparation] screen appears.
FinePix E500/E510
Fx-E500 Batt. Jig