FujiFilm FinePix E 500, Service Manual

Page: 33 / 83

33
4. Adjustment
FinePix E500 Service Manual
4-4. Calibration method of pattern box
< Use the pattern box for CAMERA adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
160±5cd/m
2
(with LB140 filter)
No chart, center of pattern box
Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 160±5cd/m
2
.
(2) Color temperature:aa
6100±50 K (with LB140 filter)
No chart, center of pattern box
Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the color temperature meter,
adjust the pattern box color temperature to 6100 ± 50 K.
4-5. Adjusting soft installation
4-5-1. Various downloading software decompressions, preservation methods, and notes
The PC adjustment software are in a specified Web server,
and both of these are the compression of ZIP form files.
Therefore, after downloading these compression files from
the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the
ZIP form can be done, any software is OK.
(Please prepare each one for the decompression software.)
The decompression and the preservation method of the PC
adjustment software and the firmware are described
to the following.
* The PC adjustment soft decompression and preservation
method
<Step1>
Download compressed PC adjustment software (ZJ00827-
100.ZIP) from Web server (http://fujifilm-di.intranets.com/)
<Fig. 4-5-1>.
<Step2>
Defrost the downloaded compression software.
(Note)
* Specify the preservation drive for C drive if it is
decompression software which can specify the preservation
drive.
* Similarly, defrost without making a new folder if it is
decompression software which can be defrosted without
making a new folder.
* Defrost simply if the decompression software which you have
cannot specify the drive specification and the folder making.
<Fig. 4-4-1> Calibration method of pattern box
LB140
Pattern BOX
(All white)
ZJ00827-100
My Computer
3.5inch FD(A:)
(C:)
FinePixE500_W
<Fig. 4-5-2>
<Fig. 4-5-1> Fujifilm-di.intranets Screen
FxE500 W PC Soft Ver.1.00 ZJ00827-100.zip