103
6
102
CONNECTING AT DSC MODE
3
4
When you press the “
<
” (power) button on the
cradle, the camera is connected to your PC as a
removable disk drive and the power lamp on the
cradle lights. “DSC” also appears on the display
panel.
The self-timer lamp blinks and the viewfinder
lamp alternately blinks green and orange while
the camera is communicating with your PC. Do
not disconnect the camera during communication.
●
!
See P.106 for information on removing the camera.
●
!
The Auto Power Save function does not operate
when the camera is connected to a PC.
◆
When the Cradle is Not Used
◆
Set the “USB MODE” setting in the “SET–UP”
menu to “DSC”. (
➡
P.92, 93)
●
!
Check that the AC power adapter and the special
USB cable are connected to the cradle.
1
2
➀
Load a SmartMedia containing photographed
images.
➁
Open the connection socket cover on the
bottom of the camera.
➂
Switch the camera off and place it in the
cradle.
●
!
Push the camera firmly onto the cradle connector.
Connect the special USB cable to the DIGITAL
(USB) socket on the camera and switch the
camera on (
➡
P.8, 22).
●
!
The AC power adapter should be used when the
camera is connected to a PC (
➡
P.19).
●
➀
●
➁
●
➂
Install the software by referring to the
Software Quick Start Guide booklet for the
installation procedure.
If Windows driver installation has started, refer
to the Software Quick Start Guide booklet.
◆
If You Do Not Use FinePixViewer
◆
You need QuickTime 3.0 or later or DirectX 8.0
Runtime (for Windows). To play back audio,
use the software provided with your operating
system (Windows and Macintosh).
Summary of Contents for FinePix 6800 Zoom
Page 1: ......
