FujiFilm FF210002, Owner'S Manual

Page: 341 / 404

317
P
eripherals and Optional
A
c
c
essories
11
External Flash Units
EF-X8
The following settings are available when an optional EF-X8
shoe-mounted fl ash unit is attached.
END ADJUST
EF-X8
MODE
Setting Setting Description Description
A
Flash control mode
Choose from the following options:
•
TTL : TTL mode. Adjust fl ash compensation (
B
) and choose
a fl ash mode (
C
).
•
M : The fl ash fi res at the selected output (
B
) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C
(COMMANDER) : Choose if the fl ash is being used to con-
trol remote synced fl ash units, for example as part of a stu-
dio fl ash system.
•
D (OFF) : The EF-X8 does not fi re. Flash units connected
via the sync terminal will still fi re when the shutter is re-
leased, but can be disabled by lowering the EF-X8 and turn-
ing the units off in the fl ash settings menu.
B
Flash compensation/
output
Adjust fl ash level. The options available vary with the fl ash
control mode (
A
).