manualshive.com logo in svg

FujiFilm CR-IR 362, Service Manual

Share
Download
FujiFilm CR-IR 362 Service Manual Download Page 30

CR-IR 362

 Service Manual

IN-29

IN-29

011-207-09E

09.30.2009 FM5539

7.  CL Installation Procedures

1.

  Perform the CL installation procedures.

u

 NOTE 

u

Complete "7. CL Installation Procedures" before performing the procedures 

described in "8. Installing RU Software."

  {FCR XG-1/CR CL Service Manual}

8.  Installing RU Software

u

 INSTRUCTION 

u

If the OS of CL is Windows Vista, confirm the followings before installation.

-  The version of PC-TOOL is V4.0 or later.

-  The UAC (User Account Control) is set to OFF. If the UAC is set to ON, set it to OFF, 

install the PC-TOOL, and install the RU software. After performing the procedures 

above, set back UAC to On again.

 

REFERENCE 

 

This chapter describes the procedures, by way of example, where settings are made 

as follows:

IP address of the RU  :   172.16.1.11

IP address of the CL  :  172.16.1.21

8.1 

Setting the IP Address of the RU

1.

  Turn ON the power of the CL.

2.

  Turn ON the power of the RU.

Summary of Contents for CR-IR 362









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands