manualshive.com logo in svg

FujiFilm CR-IR 362, Service Manual

Share
Download
FujiFilm CR-IR 362 Service Manual Download Page 20

CR-IR 362

 Service Manual

IN-19

IN-19

011-207-09E

09.30.2009 FM5539

3.3 

Transfer

 CAUTIONS

-  When unloading the machine, two persons should always cooperate to do so.

-  When transferring the machine by use of its casters, raise the adjustable feet 

of the machine all the way up to their upper limit.

-  When bringing the machine into the installation place, support it so that it will 

not topple down.

-  When supporting the machine, grasp the sides and rear of the machine.  If 

the plastic portion of the machine's front is grasped, the machine may be 

damaged.

-  When the machine should be moved over some step or bump, move it as 

slowly as possible to avoid shock to it.  Note that the step over which the 

machine may move is about 10 mm high at most.

1. 

Put the hand lifter underneath the machine.

u

 INSTRUCTION 

u

The hand lifter should be oriented aslant with respect to the machine.

2. 

Transfer the machine into the installation place.

3.4 

Temporary Placement

1.

  Secure space required for installation procedures and temporarily 

place the machine.

2.

  Secure the machine with the adjustable feet in place.

Summary of Contents for CR-IR 362









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands