47
6 Finisher D/Interface Module
Note
Interface Decurler Module or Interface Module is required to connect the main unit.
Main specifications
5
Booklet Tray
Saddle stitch and bi-fold paper is ejected.
6
Booklet output button
When the button is pressed, paper output in the Booklet Tray
is moved to the collecting position.
7
Cover of Finisher D
Open this cover to clear paper jams, replace the Staple
Cartridge, remove jammed staples or dispose of cut pieces
for punched holes.
8
Staple Waste Container
Staple waste goes in here.
Refer
For the method of replacing the staple waste container,
refer to the label affixed on the machine.
9
Staple cartridge for side stitch This unit is used to replace staples for side stitch.
10
Staple cartridges for saddle
stitch
This unit is used to replace staples for saddle stitch. There are
two.
11
Hole Punch Waste Container
Punched pieces go in here.
Refer
For the discard method of waste in the waste container,
refer to the label affixed on the machine.
12
Cover of Interface Module
Open this cover to clear paper jams.
13
Error Indicator/Curl
correction button
When paper jam occurs, the error indicator is turned on.
The curl correction button is used to correct paper curl. The
correction method is the same as the Interface Decurler. The
3 correction levels are available: OFF, upward, and
downward.
Refer
Item
Specification
Type
Top Output Tray
Sort / Stack
Finisher Tray
Sort (Offset available) / Stack (Offset available)
Booklet Tray
Sort / Stack
No.
Component
Function