Replacing the Staple Cartridge
91
M
a
int
e
na
nc
e
5
Replacing the Staple Cartridge
Replacing Staple Cartridge (for Finisher-A1)
When the optional Finisher-A1 is installed and the staple cartridge needs to be replaced, a
message appears on the touch screen. When this message appears, load a new staple case
into the staple cartridge.
Important •
The use of staple cartridges not recommended by Fuji Xerox may degrade quality and performance.
Use only staple cartridges recommended by Fuji Xerox.
•
When the machine is in the Power Saver mode, exit the Power Saver mode by pressing the <Power
Saver> button and the <Machine Status> button on the control panel before you replace the staple
cartridge.
•
When replacing the staple cartridge, press the <Machine Status> button and check the current
status for the staple cartridge even when the control panel is lit.
Note
•
To order a staple cartridge, contact our Customer Support Center.
1
Make sure that the machine is not operating, and open the finisher front door.
2
Take the staple cartridge out of the finisher.
3
After you take out the staple cartridge, check inside of the finisher for any remaining
staples.
Summary of Contents for DocuCentre-VI C2264
