Fuji Xerox DocuCentre-VI C2264, Quick Reference For English-Speaking Users

Page: 13 / 129

Safety Notes
13
Bef
ore
Us
ing
the
M
a
ch
ine
1
Electrical Safety
To prevent electric shock and a fire accident due to electric leakage, always connect the
ground wire first to either of the followings. The ground wire is green/yellow and comes out
with the power cord from the rear panel of the product.
- Ground terminal on a wall outlet
- Copper blade nailed deeper than 850 mm into the earth.
- Ground terminal which had Type D grounding construction
Be sure to connect the ground wire first before plugging in. Conversely, unplug first when
disconnecting the ground wire.
Check a wall outlet and its grounding for the product. If no grounding is available, contact
Fuji Xerox Customer Support Center.
Never connect the ground wire to the followings:
- Gas supply tube (which may cause an ignition or explosion.)
- Grounding for telephone line or a lightning arrester. (If a lightning strikes, large current
may go through.)
- Water supply tube or faucet. (If any plastic is used in a tube or faucet, it does not work as
a grounding.)
Insufficient ground connection may cause an electric shock.
To prevent electric shock and a fire accident due to electric leakage, provide Type D or
better grounding construction to this product.
Plug the power cord directly into a grounded electrical outlet. To prevent overheat and a
fire accident, do not use an extension cord, a multi-plug adaptor or a multiple connector.
Consult Fuji Xerox Customer Support Center to check if an outlet is grounded.
Connect this product to a branch circuit or an outlet that has larger capacity than the rated
ampere and voltage of this product. See the data plate on the rear panel of this product for
its rated ampere and voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty and damp environment may bring
about minute electric current in a connector. It may generate heat and eventually cause a
fire accident.
To avoid the risk of electric shock and a fire accident, only use the power cord supplied with
this product or the ones designated by Fuji Xerox.
The power cord is exclusive use for this product. Do not use it for any other product.
Do not damage or alter the power cord. Damage and alteration may generate heat and
eventually cause electric shock or a fire accident.
If the power cord is damaged or insulated wires are exposed, contact Fuji Xerox Customer
Support Center for its replacement. Do not use a damaged or uninsulated cord to avoid the
risk of electric shock and a fire accident.
When cleaning this product, always switch off and unplug it. Access to a live machine
interior may cause electric shock.