5 System Settings
130
Syst
em S
e
tt
in
g
s
5
Login Setup/Auditron Administration
In [Login Setup/Auditron Administration], you can set different restrictions for each user
to prevent unauthorized users from operating or accessing the machine, and can check
the number of pages used by each user.
When the Login Setup/Auditron Administration feature is enabled, each machine user
must enter a user ID and passcode, thus providing administrative control and
accounting for the machine.
This section describes fax billing data settings. For information that is not listed in this
section, refer to the Administrator Guide.
1
In the [System Settings] screen, select [Login Setup/Auditron Administration].
For the method of displaying the [System Settings] screen, refer to "System Settings Procedure" (P.100).
2
Select any item.
Fax Billing Data
You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Administration prior to the operations. For details on how to enable the fax feature, refer to
"6 System Settings" > "Login Setup/Auditron Administration" > "Login Setup/Auditron Mode"
in the Administrator Guide.
Note
• Set the communications time per unit charge in each time band (daytime/night/midnight) in
[Billing]. For information on how to set [Billing], refer to "Billing - Day Time, Billing - Night
Time, Billing - Midnight" (P.128).
• The registered details can be confirmed by printing the [Billing Data List]. For information
about how to print, refer to "Billing Data List" (P.142).
1
Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to "System
Settings Procedure" (P.100).
2
Select [Fax Billing Data] and select
[Change Rate Per Unit].
Charge Rate Per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5
Select [Save].
