6
19
CHANGING THE SHAPE OF THE FAN
A) Loosen the collar 6094. Turn the air cap 6093 to the horizontal
position then re-tighten to collar to lock it into place. This setting produces
a vertical spray pattern. This pattern is used more than any other by
experienced spray painters.
B) Setting the air cap in a vertical position produces a horizontal
spray pattern. The horizontal fan pattern is the most useful for painting
vertically such as a doorframe.
CHANGING THE SIZE OF THE FAN
To produce a smaller round fan pattern, turn the pattern control knob
6073 counter-clockwise. Because the spray pattern size is now much
smaller,
you must turn down the amount of paint
spraying through the
nozzle (fluid knob 8029). If you do not do this, you will get runs.
To set the fluid output, simply turn the fluid knob 8029 counter-clockwise for
more ‘paint’ and clockwise for less. Once you set the fluid to your liking,
you can leave it in this position - unless of course, you change the size of
the fan pattern.
For the very smallest pattern (less than about 1 1/2”), you must move the
gun closer to the workpiece - but don’t forget to reduce the amount of paint
at the fluid knob (rear of gun) when you do this.
