Fuji Micro Genforce Baumr-AG BM-700i User Manual Download Page 16

Page: 16 / 30

Petrol Powered Inverter Generators

E&OE

Control Panel and Functions

The generator features a control panel for connecting devices and monitor or understand generator status.

The features vary between models; for example, some models have digital displays, several AC connections,

USB connection etc. The main features of each control panel type are described below.

No.

Description

Engine ON / OFF

– Place in the "ON" ("

") position to be able to start the generator. Place in the "OFF" ("

position to stop the generator.

240VAC Output

– Used for powering a 240VAC device that connects via a standard 3-pin plug. The

generator may feature more than one socket. Lift the cover to access the connector.

12VDC Battery Charger Output

– Used for charging a 12V battery (charging cable supplied).

12VDC Output

– Used for powering a 12VDC device that connects via a standard vehicle 12V/cigarette

lighter adaptor (cable may be supplied). Lift the cover to access the connector.

12VDC Output Protection Reset

– Used to reset the 12VDC output over-current protection. If the over-

current protection trips, the button “pops out”. Press to re-activate the generator DC output.

5VDC Output

– Used for powering a 5VDC device that connects via a standard "USB" cable (cable may be

supplied). Lift the cover to access the connector (if applicable).

Economy Mode

– Used to lower the engine idle speed when powering low-draw devices (for example, a

laptop or charging a battery) and conserve fuel. The generator automatically adjusts the engine speed based

on load, as normal.

Emergency Stop

– Used to stop the engine instead of using the engine ON/OFF switch. Press and hold until

the engine stops.

Ground Connection

– Uses to ground the generator – see

Grounding the Generator

Low Oil

– Illuminates red if the engine oil level is inadequate and will automatically stop the engine. This

safety feature may also prevent the engine being started. If the engine oil level is low,

top it up.

Overload

– Illuminates red when the power being drawn from the generator exceeds its rated power output

or a short-circuit has occurred in a connected device. If it remains illuminated, switch the generator OFF and

disconnect one or more devices before using the generator again. Ensure that the generator is operating

within its rated power output capacity or, in the event of a device short-circuit, have the device repaired. If this

indicator remains illuminated after generator start-up or without any devices connected to the generator,

switch the generator OFF and have it inspected at an authorized service centre.

Power

– Illuminates green when the generator is operating normally and the power being drawn from it is

within its rated power output capacity.

FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG FUJI-MICRO GENFORCE BAUMR-AG