Fuji Electric ZKMA, Instruction Manual

Page: 4 / 118

- iii - INZ-TN2ZKMA-E
Cautions on use
DANGER
 If unusual smell or sound has been produced, immediately stop the
instrument.
Any discharge produced may cause a fire.
CAUTION

Leaving the converter unused for a long time or restarting it after dis-
use requires procedures different from normal operation or suspension
procedures. Be sure to follow the instructions in each instruction man-
ual.
Otherwise, intended performance may not be achieved, or acci-
dents or injury may result.

Do not operate the converter for a long time with its door left open.
Otherwise, dust, foreign matter, etc. may stick on internal walls, there-
by causing failure.
PROHIBITION

Do not touch the input/output terminals with metal or finger. Other-
wise, failure, electric shock or injury may result.
Caution on maintenance and inspection
CAUTION

Before maintenance and check, be sure to turn off the main power
supply and wait until the detector is cooled adequately.
Otherwise,
you may suffer a burn.

Before removing the detector from the flue for maintenance and
check, make sure the furnace is stopped. Otherwise, you may suffer a
burn.

Before working, take off a wrist watch, finger ring or the like metallic
accessories. And never touch the instrument with a wet hand.
Other-
wise, you will have electric shocks.

If the fuse is blown, eliminate the cause, and then replace it with the
one of the same capacity and type as before.
Otherwise, it may cause
electric shocks or failure.
Others
CAUTION

If the cause of a failure cannot be identified by referring to the instruc-
tion manual, be sure to contact your dealer or Fuji’s technician in
charge of adjustment.
Disassembling the instrument carelessly may
result in electric shock or injury.

Do not use a replacement part other than specified by the instrument
maker. Otherwise, adequate performance will not be provided. Be-
sides, an accident or failure may be caused.

Replacement parts such as a maintenance part should be disposed of
as incombustibles.
Electrical Safety:
Overvoltage
category
; II power supply input
; I relay interfaces
(IEC1010-1)
External overcurrent protective device
; 10A
Equipment interfaces are safety
separated (SELV)