Fuji Electric ZKMA, Instruction Manual

Page: 101 / 118

- 90 - INZ-TN2ZKMA-E
10.5.11 Setting of hold setting value (maintenance hold)
Description

Using this function, you can set the output value of analog output signal to an arbitrary value when the
analog output hold function (maintenance hold) is enabled.
This function is to set the output value of an analog output at a percentage (%) of the full-scale value,
when “setting value” is selected and specified on the “10.5.10 Hold value setting
(maintenance
hold).”

Settable range: 0 to 100 %
Procedu
re
Operation
(example)
Setting the output value of analog output hold to “000%”
Key operation Description
Displayed message
(LCD)
(1) Display the screen on the right in accordance with the key op-
eration summary and press the
key.
PARAMETER MENU
AO HOLD (MAINTE)
(2)
Press the key to display the screen on the right and press
the key.
The hold setting value setting screen appears.
AO HOLD (MAINTE)
HOLD VALUE
(3)
Use the and key to set the hold value.
Press the key to set the value.
HOLD VALUE
0 00 %
(4)
Press the key.
HOLD VALUE
000 %
(5) The display returns to the screen on the right.
AO HOLD (MAINTE)
HOLD VALUE