5 - 1
INZ-TN2ZKJ-E
Name
q
MODE key
w
SIDE key
e
UP key
r
DOWN key
Description
Used to switch the mode.
Used to change the selected item
(by moving the cursor) and
numeral digit.
Used to change the selected item
(by moving the cursor) and to
increase numeral value.
Used to change the selected item
(by moving the cursor) and to
decrease numeral value.
Name
t
ESC key
y
ENT key
u
ZERO key
i
SPAN key
Description
Used to return to a previous screen
or cancel the setting midway.
Used for confirmation of selected
items or values, and for execution
of calibration.
Used for zero calibration.
Used for span calibration.
5.
DESCRIPTION OF DISPLAY AND OPERATION PANELS
This section describes the display unit and operation panel of the analyzer unit. It also explains the name
and description of function on the operation panel.
5.1 Name and description of operation panel
Fig. 5-1
MODE
POWER
DISPLAY
ESC
ZERO
ENT
SPAN
Note) The switch for back light is used for turning ON/OFF the back light of display.
The life time of back light is 50000 hours.
Please turn OFF the switch when indication is not necessary, so the life time will be longer.
