Fuji Electric PUM Instruction Manual Download Page 46

Page: 46 / 76

INP-TN5A1634-E

Check the trend display on the “TrendDisplay – Trend” screen.

Select a pen for which scale is to be displayed.

Note

•

Save the trend data, if required, in a CSV file by giving a name to it.

•

If the trend data is displayed in a CSV file, the CSV file previously displayed is overwritten.

•

If the displayed CSV file is saved, the time display becomes “00” (fraction omitted).

•

If sec. display is required, select “time” for display format in Excel cell format setting, change it into desired display format,
and then save the data.

•

The first data at the start of trend display may differ from the actual value.

•

Do not press the “Start trend” button on the trend select screen while the trend is being displayed. Otherwise the trend is
displayed overlapped.

•

The final data may not be displayed when the trend display is stopped. Check the data in CSV format in this case.

•

When you select the St. No from the analog module, do not select "Set value (SV)", "Manipulating value (MV1)", or
"Manipulating value (MV2)".

Summary of Contents for PUM













































































Search results

Summary of Contents for PUM

Reviews:

Related manuals for PUM

Brands by name

Popular brands

Fuji Electric PUM, Instruction Manual

Search results

Summary of Contents for PUM

Reviews:

Related manuals for PUM

Brands by name

Popular brands