INP-TN5A1634-E
11
6
Starting the PUM parameter loader
When you launch “PUM loader” in start menu, “module type selection” is indicated.
1
In “module type selection” screen, select the module type of temperature controller to be launched and click [OK].
If you click [Cancel], parameter loader for PUM is end.
(2) Click.
(1) Select the module type of temperature controller
to be launched.
2
“Startup mode” is indicated.
Screen of control/ event / analog module at start-up.
Initial values startup mode (P.13)
Module data reception launch mode (P.19)
Note) Module connection designation is
only for the function of control/ event/
analog module
File selection startup mode (P.17)