44
[Description]
• With this function, predetermined value is added to the origi-
nal SV. This parameter is used to eliminate the offset that
occurs in performing P control.
• The PXR operates based on the SV to which the SV offset
value is added.
SV (Setting value) offset (Setting range: -50 to 50%FS)
[Setting example] Adding the SV offset value of 9
°
C to the currently set value
Press and hold the
SEL
key for three seconds.
will be displayed on the PV display.
Press the
key to display
.
Press the
SEL
key once.
The current setting ( ) flashes on the SV display.
Press the
or
key to display .
Press the
SEL
key once. will stop flashing and will be registered for
. (The displayed
SV remains unchanged.) After that, the controller will operate at the SV value to which the SV
offset value of 9
°
C is added.
If you want to display the operation status, press and hold the
SEL
key for two seconds.
Operating procedure
Display
1.
2.
3.
4.
5.
6.
• Alarm judgment is made by the displayed SV to which
the SV offset value is not added.
