Table 10.1 List of DC Reactors (DCRs)
Power
supply
voltage
Nominal applied
motor (HP)
Applicable inverter type
DCR type
7.5
FRN0025C2S-2U
DCR2-5.5
10
FRN0033C2S-2U
DCR2-7.5
15
FRN0047C2S-2U
DCR2-11
Three-
phase
200 V
20
FRN0060C2S-2U
DCR2-15
7.5
FRN0013C2S-4U
DCR4-5.5
10
FRN0018C2S-4U
DCR4-7.5
15
FRN0024C2S-4U
DCR4-11
Three-
phase
400 V
20
FRN0030C2S-4U
DCR4-15
Chapter 11 COMPLIANCE WITH STANDARDS
11.1 Compliance with European Standards
The CE marking on Fuji products indicates that they comply with the essential requirements of the
Electromagnetic Compatibility (EMC) Directive 2004/108/EC issued by the Council of the European
Communities and Low Voltage Directive 2006/95/EC.
Inverters that bear a CE marking are compliant with the Low Voltage Directive.
The products comply with the following standards:
Low Voltage Directive
EN61800-5-1: 2007
EMC Directives
EN61800-3:
2004 +A1: 2012
Immunity:
Second environment (Industrial)
Emission:
Category C2
(Applicable only when an optional EMC-compliant filter
is attached)
CAUTION
The FRENIC-Mini series of inverters are categorized as a "restricted sales distribution class" of the
EN61800-3. When you use these products with any home appliances or office equipment, you may
need to take appropriate countermeasures to reduce or eliminate any noise emitted from these
products.
11.2 Compliance with EMC Standard
11.2.2 Recommended installation procedure
In case an outboard, EMC-compliant (optional) is used
If noise from the inverter exceeds the permissible level, enclose the inverter and its peripherals
within a metal pane.
For details, refer to the FRENIC-Mini Instruction Manual (INR-SI47-1745-E), Chapter 11
Sec-
tion
11.2 "Compliance with EMC Standard."
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
