Fuji Electric FCX-AII-V5 series, Instructions Manual And Service Instructions

Page: 75 / 120

TN5FCXA2V5h-E 73
Menu 2 : Type
0RGHOFRGHRI¿HOGGHYLFHLVGLVSOD\HGDQGFKDQ -
ged (ex. of differential pressure transmitter).
• After TAG N° is displayed, press the < INC !NH\
to display TYPE image.
• To make changes press the < CHNG !NH\XQGHU
display
c
and the cursor will be displayed under
display d .
• Set the alphanumeric keys as necessary under
display d . To set the alphabet, press the < CHNG
ALHA
!NH\¿UVW
Using < Y ! Z !NH\VFXUVRUSRVLWLRQFDQEH
moved.
• At the completion of setting, press the < ENT !
key and a prompt is displayed check entry under
display
d .
• If the entry is correct, press the < ENT
!NH\WRLQSXW
LWWRWKH¿HOGGHYLFHXQGHUGLVSOD\ e and f and
the initial image
c
is displayed. Otherwise press
< CL ! WRFRPHEDFNWRWKHPRGL¿FDWLRQGLVSOD\ d
• To display SERIAL N°, press the < INC
!NH\XQGHU
display c .
Menu 1 : Tag N°
To set the TAG N° of the transmitter, use the pro-
cedures shown in the following diagram.
TAG N° can be inputted up to 26 characters of
alphanumeric codes.
• After PUSH MENU KEY is displayed, press the
< MENU
!NH\WRGLVSOD\7$*1ƒ
• To make changes press the < CHNG> key and the
cursor will be displayed under display
c
.
• Set the alphanumeric keys as necessary under
display
d
.
To set the alphabet, press the < CHNG ALHA !
NH\¿UVW
Using < Y ! Z !NH\VFXUVRUSRVLWLRQFDQEH
moved.
• At the completion of setting, press the < ENT !NH\
• If the entry is correct, press the < ENT
!NH\WRLQSXW
LWWRWKH¿HOGGHYLFHXQGHUGLVSOD\ e and f and
the initial image
c
is displayed. Otherwise press
< CL ! WRFRPHEDFNWRWKHPRGL¿FDWLRQGLVSOD\ d .
• To display TYPE display, press the < INC
! NH\
under display c .
1: TAG No
FICRA-1234
xxxxxxxxx
xxxxxxxxxxxxxxxxxxx
< INC > < CHANGE >
1-1: TAG CHANGE
FICRA-1234
xxxxxxxxx
xxxxxxxxxxxxxxxxxxx
< ENT > < CL >
1-1: TAG CHANGE
FICRA-4321
xxxxxxxxx
xxxxxxxxxxxxxxxxxxx
CHNG OK?< ENT/CL >
1-2: TAG WRITE
FICRA-4321
xxxxxxxxx
xxxxxxxxxxxxxxxxxxx
To menu 2 : TYPE
0: PUSH MENU KEY
CL
INC
CHNG
MENU
CL
ENT
ENT
after setting
1
2
3
4
2: TYPE
FKCXXXXX-XXXXX
< INC > < CHANGE >
2-1: TYPE CHANGE
FKCXXXXX-XXXXX
< ENT > < CL >
2-1: TYPE CHANGE
FKCXXXXX-XXXXX
CHNG OK?< ENT/CL >
2-2: TYPE WRITE
FKCXXXXX-XXXXX
To Menu 3 : SERIAL No. and Software version
Menu 1 : TAG No.
CL
INC
INC
CHNG
CL
ENT
ENT
after setting
1
2
3
4