www.fubag.ru
O
m
perator's
anual
1. Connect the ground terminal.
2. Start each engine according to "STARTING THE ENGINE". When the output indicator
light(green) does not light and the overload indicator light (red) lights instead, set the engine switch
to STOP, stop the engine at once and then start the engine again.
3. Confirm that the equipment to be used is switched off, and insert the plug of the equipment to be
used into the AC receptacle.
- Confirm that the use equipment to be connected is switched off.
- When the equipment to be used is switched on, it will operate suddenly,
and injuries or accidents may be caused.
CAUTION!
Earth Mark
Ground Terminal
Output Indicator Light (Green)
Overload Indicator Light (Red)
- 15 -
www.fubag.ru
Summary of Contents for TI1000
Page 1: ...www fubag ru ...
