AC applications
1. Start the engine and make sure the output indicator light (green) comes on.
2. Confirm that the appliance to be used is switched off, and plug in the appliance.
- Substantial overloading that continuously lights the overload indicator
light (red) may damage the generator. Marginal overloading that
temporarily lights the overload indicator light (red) may shorten the
service life of the generator.
- Be sure that all appliances are in good working order before connecting
them to the generator. If an appliance begins to operate abnormally,
becomes sluggish, or stops suddenly, turn off the generator engine switch
immediately. Then disconnect the appliance, and examine it for signs of
malfunction.
3. In order to acquire both the best effect and the maximum service life of the generator. Usually, the
new generator should run 20 hours under 50% load, the generator may reach the best performance.
www.fubag.ru
O
m
perator's
anual
Overload Indicator
Light (Red)
Output Indicator Light (Green)
Plug
WARNING!
- 13 -
Output Indicator Light (Green)
Plug
TI1000
Overload Indicator
Light (Red)
TI2000
TI2600
www.fubag.ru
Summary of Contents for TI1000
Page 1: ...www fubag ru ...
