9
Before installation/maintenance, the tractor and attachment should
be stationary with the hydraulic lift system in a neutral position and
the ignition key removed.
Skid Adjustment:
Raise the tilling depth for drier patches of ground or heavier soil types. To
do this, raise the tractor
’
s hydraulic lift arms and adjust the skids on the
attachment to increase the blade tilling depth. A lower pass can be made
when the top layer of soil is broken up.
Ensure the attachment is raised slightly off the ground, but stable and
secure when adjusting the skids.
Set Working Depth
1.
Loosen and remove bolt and nut (
1)
on the skids on both sides of the
attachment.
2.
Move the skids up or down to the desired height.
3.
Align the hole on the body with the silver adjuster hole.
4.
Re
-
insert and tighten bolt and nut (
1)
.
1
10
Gearbox Maintenance
Gearbox Oil Level
Check oil level when the unit is cold and the machine is level. The gear oil
should be up to the level plug on the side of the gearbox. Avoid over
filling as this may cause excess pressure and oil leaks.
2
1
Gear Oil Grade
80w90 gear oil for all conditions (or equivalent)
Gearbox Oil Level
Approx. 0.5 litres to level plug
First Oil Change
50 hours use
Oil Change Frequency
250 hours/yearly (whichever is first)
Remove level plug (
1
) and filler/breather plug (
2
). The oil level should reach
level plug (
1
). Top
-
up the oil through (
2)
if required. Avoid over filling as
this may cause excess pressure and oil leaks. Replace and tighten both
plugs, do not over tighten filler/breather (
2
) as this may cause a pressure
build
-
up in the gearbox).
Oil Change
#1
Oil Change
#2
Oil Change
#3
Oil Change
#4
Oil Change
#5
Oil Change
#6
/ /
/ /
/ /
/ /
/ /
/ /
Before installation/maintenance, the tractor and attachment should
be stationary with the ignition key removed. Follow labels on any oil
and grease, always dispose of oils as instructed.
