FTE UNIVERS U+ WB1-11-OCPP-LK7, User Manual

Page: 24 / 40

User’s manual · WB1-11-OCPP-LK7 & WB1-11-OCPP- User’s manual · WB1-11-OCPP
User’s manual · U+ WB1-7-OCPP-LK7 / U+ WB1-11-OCPP-LK7
Technical changes and mistakes reserve
-7- u+
WB1-7-OCPP-LK7 / U+ WB111-OCPP-LK7 Versión en_1.0 Univers by FTE
Note: If your charger is with PEN protection function, please connect the wires as follow.
5 Configuration and Operation
5.1 Power-on Checking
1. Checks before Power-on
Please check/re-check the following items prior to initial Power-on :
•
The charger’s location allows good operational access to normal use and repair &
maintenance.
•
The AC input components within the premise’s power supply are fitted correctly with
required protection items prior to installation of the charger.
•
Double confirm the charger is installed properly.
•
No components or other items have been left on the top of the charger.
1)
Power-on status checking
Power-on the charger, the LED indicator should be in standby status.
State Description LED Status
Standby Power-on, but no gun plug-in
Flashing green, 1second on; 3 seconds
off
Ready to charge Gun plugged in, but not yet started charging Constantly green
Charging in progress Gun plugged in, charging in progress
Breathing green, 1second on;
1second off
Fault has occurred
An error condition has occurred; See
Section 6 (Troubleshooting) for details of
error conditions
Flashing red or constantly red
2)
Configure the internet
1.
Download ChargeIn APP in APP Store/Google Play or scan the QR code.
2.
Follow the steps of configure to connect the charger to internet.