FSR MAS-7000, Installation And Operating Manual

Page: 42 / 52

42
MAS-7000
FRONT PANEL BUTTON EXAMPLES
If the user is using the serial commands to simulate the front panel of the MAS-7000, the following commands
are provided. They have been tested.
The commands are to be sent out in the following manner, with no spaces between the
fi elds.
F4410410082000010??<CR>
Would switch the source to RGB.
Source = RGB
SOP CMD CHA WIN OUT FUN PAY CS EOP
F 04 00 41 00 82 000010 D7 <CR>
Where:
CMD
04, Write command
CHA 00
WIN 41, Window “A”
OUT 00, Output 1
FUN 82, Change Program source
PAY 000010, Source RGB
CS ??, test checksum
Source = YUV
SOP CMD CHA WIN OUT FUN PAY CS EOP
F 04 00 41 00 82 000011 D8 <CR>
Where:
CMD
04, Write command
CHA 00,
WIN 41, Window “A”
OUT 00, Output 1
FUN 82, Change Program source
PAY 000011, Source YUV
CS ??, test checksum
Source = DVI
SOP CMD CHA WIN OUT FUN PAY CS EOP
F 04 00 41 00 82 000012 D8 <CR>
Where:
CMD
04, Write command
CHA 00,
WIN 41, Window “A”
OUT 00, Output 1
FUN 82, Change Program source
PAY 000012, Source DVI
CS ??, test checksum