FSN FS-E2101D, Instructions For Use Manual

Page: 25 / 44

25
8/2021
Submenus under the PIP menu
1. LAYOUT Changes the layout. (OFF, PIP, PBP1. PBP2)
2. INPUT Changes the secondary source.
3. SIZE Changes the PIP size. (Small, Large)
4. POSITION Changes the PIP position.
5. SWAP Swaps the position of the Primary and Secondary images.
Submenus under the SETUP menu
1. LANGUAGE Changes the OSD language. (9 language)
2. TRANSPARENCY Adjusts the OSD back ground from white opaque to half translucent.
3. OSD POSITION Changes the OSD position. (9 Positions)
4. OSD TIMEOUT Adjusts time until the OSD menu will disappear after adjusting the menu. (5, 10, 20, 30,
60, 90, 120, 180, 240 seconds)
5. RESET SETTINGS Changes all the OSD values to factory default.
6. AUTO INPUT SELECT Disables or enables auto source select. (ON: Searches through all possible input
sources until an active video source is found.
OFF: Video input is manually selected.)
7. PICTURE DELAY Adjust the picture delay. (0: Disable deinteracer engine,
1: Enable deinteracer engine)
8. KEYPAD BUZZER Turn the keypad buzzer sound on or off .
9. SMART INPUT Enables automatic switch to the backup source when main source is off .
10. SMART MAIN When smart input is on, current source is changed to main source.
11. SMART 2ND When smart input is on, backup source set to 2nd source.
12. INACTIVE INPUT
(FS-P2404D, FS-P2604D, FS-L2702D, FS-L2702DT)
Change the input source between RGBs and YPbPr.
On Screen Display (OSD) Menus
FS-E2101D, FS-E2101DT, FS-P2404D,
FS-P2604D, FS-L2702D, FS-L2702DT
Main Menu
Categories
Sub Menu
Categories
Sub Menu Value or
Setting
Video Source
Information
On Screen Display (OSD) Menus
FS-L2403D, FS-P2603D, FS-L3202D