FSN FS-E2101D, Instructions For Use Manual

Page: 23 / 44

23
8/2021
On Screen Display (OSD) Menus
FS-Y1901D
Submenus under the COLOR TEMP menu
1. MODE Changes the color mode. (C1, C2, USER)
2. RED Red balance. (Only works with USER mode) (Range : 0~100)
3. GREEN Green balance. (Only works with USER mode) (Range : 0~100)
4. BLUE Blue balance. (Only works with USER mode) (Range : 0~100)
Submenus under the IMAGE menu
(variable by signal type)
1. IMAGE SIZE Changes the image size. (FULL, FILL ASPECT, 1:1, NORMAL)
2. H POSITION Adjusts the horizontal position of the displayed source image.(Range : 0~100)
3. V POSITION Adjusts the vertical position of the displayed source image. (Range : 0~100)
4. GAMMA Adjusts GAMMA value. (VIDEO, BYPASS,1.8,2.0,2.2,2.4,2.6,PACS)
5. FILTER Sets the sharpness of image. ( Softest, Soft, Normal, Sharp, Sharpest)
6. OVER SCAN Adjusts the displayed size. (0~8)
7. IMAGE SETTING Changes the image setting. (Preset 1,2 / User 1,2,3)
8. ZOOM / PAN Enlarges the image, moves images left and right.
9. FREEZE Keeps the image still.
Submenus under the SETUP menu
1. LANGUAGE Changes the OSD language. (8 languages)
2. OSD COLOR Adjusts the OSD background from white opaque to translucent.
3. OSD POSITION Changes the OSD position. (9 Positions)
4. DURATION Adjusts the length of time the OSD Menu is present on the screen. (5, 10, 20, 30, 60, 90, 120,
180, 240 seconds)
5. RESET SETTINGS Changes all the OSD values to factory default.
6. AUTO SOURCE SELECT Disables or enables auto source select. (ON: Searches through all possible input
sources until an active video source is found.
OFF: Video input is manually selected.)
7. INACTIVE INPUT Change the input source between RGBs and YPbPr.
8. PICTURE DELAY Adjust the picture delay. ( 0: Disable deinteracer engine, 1: Enable deinteracer engine)
Submenus under the PIP menu
1. LAYOUT Changes the layout. (OFF, PIP, PBP1. PBP2)
2. SOURCE Changes the secondary source.
3. SIZE Changes the PIP size. (Small, Large)
4. POSITION Changes the PIP position.
5. SWAP Swaps the position of the Primary and Secondary images.