FSM AG | Erich-Rieder-Straße 2 | D-79199 Kirchzarten | [email protected] | www.fsm.ag
27.04.2021
3 | 6
1 Introduction
1.1
Notes on operating instructions
These operating instructions are intended to ensure optimum installation, commissioning, operation and maintenance of the
device and must be read prior to performing any of these actions. Keep this documentation handy and accessible to all users
so that it can be refered to whenever necessary. Pass this documentation on to subsequent users of the product. All necessary
settings are described in this manual.
If any difficulties should occur during commissioning or operation, please do not carry out any unauthorized manipulations.
Doing so could void your warranty.
Instead, please contact us immediately:
FSM AG
Erich-Rieder-Strasse 2
D-79199 Kirchzarten
+49 7661 9855 0
[email protected]
1.2
Explanation of icons and symbols
Danger
Indicates a hazard that could lead to personal injury.
Notice
Indicates important information which, if not observed, may result in damage to property, for example.
1.3
Intended use and foreseeable misuse
The DS01+ differential pressure transmitter is used to detect low pressures and convert them into a pressure-proportional
measuring signal. The device may only be used in the specified measuring range. Only differential pressures of non-aggressive
gases may be measured with the DS01+.
Notice
Do not use the device in explosive atmospheres or for measurement of aggressive gases.
No liability is accepted for damages resulting from non-intended use. If so, any warranty claims shall be rendered
void. Unauthorized modifications, additions or alterations to the instrument are prohibited. Modifications to the
device are prohibited.
1.4 Functions
Depending on the selected measuring range, the DS01+ pressure transmitter can be used to record and display positive,
negative and differential pressures.
2
Notes for your safety
Danger
In order not to endanger any person involved in the installation and commissioning of the device, such work
should only be carried out by qualified and trained personnel.
Persons using the device must also:
>
be conscious of the dangers present when working next to live parts.
>
take measures to protect themselves against direct contact with live parts.
>
have read and understood the operating instructions.