[15]
Connecting the Exhaust
It is mandatory that the exhaust blower is connected and operating whenever you run a job on
your laser. The exhaust blower removes smoke and fumes from the case and exhausts them to
the outside of the building. You should never operate your laser without a working exhaust.
Figure 6 - Exhaust Port
The exhaust port on your laser is a 6in flange, located on the rear of the unit (Figure 6). Use
flexible metal tubing to connect the laser system to the exhaust system. Check your system for
leaks—most can be remedied with duct tape.
Figure 7 - Exhaust Fan and Tubing
