3.1.4 Contact ID Inputs
The Falcon Global can 'intercept' signals sent by the alarm panel
on its telephone line (Contact ID) interface.
If the Contact ID interface is to be used, the alarm panel's TIP
and RING lines should be connected to the TIP and RING lines
on the Falcon Global.
The alarm panel must be programmed to use its dialer, and the
option for reporting must be set to Contact ID. Refer to the
programming manual of the applicable alarm panel.
3.1.5 Serial Port
The Falcon Global can receive alarms from the following alarm
panels on its serial port:
Ÿ
Rhino 816 and Rhino 68 alarm panels
Ÿ
Texecom premier range (panel uploads and downloads can
also be done)
Ÿ
Paradox SP & MG Series
Ÿ
Pima
Ÿ
IDS805 & IDS X-Series
Ÿ
DSC Neo & Power Series
Ÿ
Risco LightSYS 2
Ÿ
Orisec
GLOBAL
Falcon Global Installation and Operation Manual
I
9
