FSI DAT QE Series Instruction Manual Download Page 22

Page: 22 / 27

All DAT® series shelters available with cross and center divider curtains, side doors, extra windows,

skylights, HVAC/Clothing ducts with ties, etc. as below.

CDC34A

FSI Shelter

1/2 Cross Divider Curtain, heavy duty, non see through, light color, removable, slip thru

for

DAT3060, DAT3030, DAT3015, DAT3370, DAT4070, DAT4360

CDC34

FSI Shelter

Cross Divider Curtain, heavy duty, non see through, light color, removable, slip thru –

for

DAT3060, DAT3030, DAT3015, DAT3370, DAT4070, DAT4360

CDC56A

FSI Shelter

½ Cross Divider Curtain, heavy duty, non see through, light color, removable, slip thru –

for

DAT5672/5800/6000/6600/6012/7500/9018

CDC56

FSI Shelter

Cross Divider Curtain, heavy duty, non see through, light color, removable, slip thru –

for

DAT5672/5800/6000/6012/7500/9018

CD34

FSI Shelter

Center Divider Curtain for DAT3060, DAT3030, DAT3015, DAT3370, DAT4070, DAT4360

CD56

FSI Shelter

Center Divider Curtain as above –

for DAT5672/5800/6000/6600/6012/7500/9018

Skylights for all shelters

STE

Private Stencil X 2 per shelter/shower/pool/other

limited sizes/styles/colors avail.

STEL

Special Logo X 2 per shelter/shower/pool/other

limited sizes/styles/colors avail.

ERS

Red or Green reflective striping above dirty and clean entry/exit ends of decon units

Side door for shelters

CBS

Heavy Duty Carry Sleeve/Bag for DAT1010S/DAT2020S/DAT2525S/DAT2626S/DAT3030/DAT3015/

DAT3535S

CBM

Heavy Duty Carry Sleeve/Bag for DAT3060/DAT3060S/DAT3370/DAT4070/DAT4070S/DAT4360/DAT4099S

CBL

Heavy Duty Carry Sleeve/Bag for DAT5672/DAT5800/DAT6000/DAT6600/DAT6012

CBXL

Heavy Duty Carry Sleeve/Bag for DAT7500/DAT9018/DAT9099/DAT10800

Additional windows per shelter

Additional approx.17" air duct cloth inlet/outlet for HVAC/Clothing/etc. w. tie closure

RFDK

Retrofit duct kit to add an HVAC duct to an existing FSI DAT series shelter/shower system

includes 19" dia.

template, glue, boot w. velcro to affix around the cut opening, hanging HVAC duct piece

Pneumatic replacement high pressure/inflation deflation/over pressure valves

per valve

spec. type with order

Cloth Velcro skylight cover

per skylight cover

DATTEF

approx. 5' long tunnel like extension w. floor piece to join one shelter to another

FL10

10" M HD Gusseted Velcro flange attached to ends or side doors of shelters to allow attach to other units side

to side or end to end

DATZ

zippers on each end door Vs. flaps and tie downs

INSULCAN

Insulating inside canopy complete with hanging hooks for all sizes of DAT series shelters inclusive of Isolation

Shelters and Medical Surge Capacity Shelters. Heavy Duty 240 gr/yd., 200 denier nylon, polyurethane coated

materials dramatically improves insulating factor.

FLDS

Full center length internal closed air ducting 'plenum' system for all FSI shelter systems with multiple air outlet

vents (size of shelter dependent)

ideal for ducting in hot/cold air and/or for HEPA/other air filtration and de-

contamination with Cold Plasma/Ozone/other.

also ideal for hiding wiring, cables, etc. internally

10 % of

unit cost or 1,500.00 maximum when ordered as original equipment on a new product

up to 3,000.00 max or

15 % of unit cost if ordered after market

Summary of Contents for DAT QE Series




























Search results

Summary of Contents for DAT QE Series

Reviews:

Related manuals for DAT QE Series

Brands by name

Popular brands

FSI DAT QE Series, Instruction Manual

Search results

Summary of Contents for DAT QE Series

Reviews:

Related manuals for DAT QE Series

Brands by name

Popular brands