18
FSI Hazmat Decontamination Quality Conformance Certificate
FSI is pleased to so advise and state that all FSI DAT ® Series Hazmat Decontamination Shower and Shelter
Systems are produced with the finest materials and using the finest current technologies in the world to produce
leading edge Hazmat Decontamination products suitable for use by Fire Brigades, Hospitals, Military, Emergency
Management Agencies, Industry, other.
All FSI products are thoroughly tested to ensure proper performance in accordance with the FSI specifications –
based on the FSI DAT ® Series product procured.
All Accessories offered with FSI DAT® series Shower and Shelter Systems have been manufactured by or for FSI in
accordance with all existing and known North American and accepted World standards, if any. In any case all such
products are thoroughly tested to ensure proper performance in accordance with Manufacturer and FSI
specifications.
FSI Decon showers meet and exceed the ANSI # 113 portable hazmat decon shower standard and FSI utilizes only
CPAI84 and NFPA701/702. FR rated fabrics.
FSI self certifies all products as being of the highest quality and have so offered same since our inception.
Other standards FSI products do meet and exceed are as follows:
FSI® DAT® SERIES PNEUMATIC SHELTER SYSTEMS
GENERAL SPECIFICATIONS
Frame/ All Shower Pools:
Heavy Duty 1100 Dtex* polyester coated w. plastomer on both sides, UV/Chemical re-
sistant, quadruple overlapped and glued.
Air pressure internally once inflated = 4.3 psi (0.3 bar) USA Federal Standard FS # 191 5041/5102/5134/5970 and
DIN EN ISO 2060/1409
-
2/2286
-
1 AND DIN 53354/53363/53357/53361 Test method structural test results.* Total
Weight (g/m2) –
1055
Thickness (mm) –
0.90
Cut strip tensile strength (lbs. /in.) –
Warp = 440
-
Weft = 380 Elonga-
tion (%) –
Warp = 27
-
Weft = 30 Tongue tear (lbs.) –
Warp =
30
–
Weft = 35 Adhesion (lbs. /in.) –
Warp = 21 –
Weft =
21 Density = 28 X 26. Meets NFPA 701 and DIN4102
-
B1, M
-
2. *Production lot runs can result in variances and all
results are approx.
Canopy:
Heavy duty 100% nylon twill (3/5) w. PU white pigment inner coating, ABT. 0 23mm X 57/58. Wt. 230GR/
Sq. M + or
-
5 % (approx. 192.3gr/sq. yard
-
6.78 ounce)
-
UV/chemical resistant/fire retardant –
Rated Ultra Violet
Protection (UPF) of 50+ where ASTM D6603 states a UPF of 40+ is rated Excellent; and water repellent w. a hydro-
static resistance of 250 psi +
-
Anti fungus/Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508
and ASTM G 21
-
96 (2002); Water Resistance (ISO 811 (E) 1981, hydrostatic pressure test at water pressure 600 m/
min. = 5540; Tensile Strength (ISO 13934
-
2: 1999 C.R.E. Method in N)
-
warp = 1300
-
weft = 1500; Tear Strength
(ISO 13937
-
1:2000, Pendulum method)
-
Warp = 25 Weft = 43; Burst Strength (ASTM 0 3787:2001, C.R.E. Ball
bursting method N) = 1620; Seam Strength (ISO 13935
-
2: 1998, Grab method N) Sewing threads fail at 710; Burst
Strength 4020 kPa per ASTM D3786/D3786
-
13; Fire resistance meets and exceeds CPAI 84 SECTION 5 1995, US
Fed. Test CFR.1610, meets NFPA701 Flammability Test method 1 (2004), NFPA 701: 2015 Test Method 2 (plat)
Large Scale, NFPA 702 w.
‘
A
’
burn scale rating, Japan JIS A 1322: 1966, Meth
-
od A. All seams double stitched and
coated both sides.
Inner Canopy:
If applicable
-
of 100% NYLON 210T ANTRON W/R, POLYURE
-
THANE COATED
57/58”,
Color:
White
-
Flame Retardant to meet
‘
NFPA
-
701 TM
-
1
’,
Anti
-
fungus/Anti
-
mildew, opaque
Floor:
1,000 dtex 0.58mm Nylon coated w. PU, tensile strength: 2545N/2360, Tear Strength: 106/102N, weight: 660
grams per sq. mm
60”
W.
Standard color is
‘
FSI Blue
’
® exterior w. high visibility white inside color.
Red/Green/White/Sand exterior canopy
color also available as standard.
Other colors optional P.O.A.
