Data Center, Enterprise & ISP Network Solutions
6
3.2 Rear Panel
Explanation:
The I/O module 1 can only be configured with a 2.5” hard disk module. Both the I/O module 2 and the I/O
module 3 can be equipped with a rear hard disk module or a riser module. This figure is for reference only,
and the actual configuration shall prevail.
Rear panel interface description
Port
Type
Quantity
Description
VGA
interface
DB15
1
Used to connect a display terminal such as a monitor or KVM.
Management
network port
GE
BASE-T
1
Provides outbound 1000Mbit/s Ethernet ports. The server can be
managed through this interface.
USB
interface
USB 3.0
2
Provides an out-of-port USB interface through which USB devices
can be accessed.
NOTE:
When using an external USB device, make sure that the USB device
is in good condition. Otherwise, the server may work abnormally.
GE electrical
interface
GE
BASE-T
2
Server service network port.
Power
Module AC
Interface
/
1 or 2
You can choose the number of power supplies according to your
actual needs, but you must ensure that the rated power of the power
supply is higher than the rated power of the complete machine.
1
I/O module 1
7
USB 3.0 interface
2
I/O module 2
8
GE electrical interface
3
I/O module 3
9
Power Module 2 AC Interface
4
Extended network card (optional)
10
Power Module 2
5
VGA interface
11
Power Module 1 AC Interface
6
Management network port
12
Power Module 1
