Data Center, Enterprise & ISP Network Solutions
13
Chapter
Ⅳ
Installing System Components
4.1 CPU Installation
Install the processor:
Step 1: CPU installation
1-1. Tilt the CPU angle as shown in the figure, and align the A1 angle (triangle mark) to the end of the holding
plate.
1-2. Press the other end of the holding tab in the direction of the arrow to secure the CPU to the holding tab.
Step 2: Install the CPU on the heat sink to ensure that the surface of the CPU and heat sink is clean, free of oil
and foreign matter. (As shown below)
2-1. Apply approximately 0.4 ml volume of thermal grease to the CPU and apply evenly.
2-2. Align the A1 corner (triangle mark) and attach the CPU to the heat sink.
