EN
7
Install Heat Shrinkable Protective Sleeve and House fibers
Check up Comprehensively
When having completed splicing the fibers, the first fiber ring should be housed on the farthest side
of FOST, the remaining fiber optic should be winded, forming a ring with diameter not less than
80mm. then put it into FOST (Fiber Optic Splice Tray) together with heat shrinkable protective sleeve.
(Firstly fix heat shrinkable protective sleeve into the slot, then enlarge the diameter of fiber ring
properly.)
NOTE:
Pay attention to the twist and bend of fiber.
Nylon tie
Nylon tie
Fiber
(bunchy or ribbon)
Heat shrinkable
protective sleeve
Grommet
FOST
Fiber
(bunchy or ribbon)
Fixing slot of heat
shrinkable protective
sleeve (bunchy or ribbon)
Fiber with
protective coat
Fiber with
protective coat
Reinforced core
Base
Fiber cable (1)
Fiber cable (3)
Fiber cable (2)
Branching clip
Fiber holding tray
Straight-through fiber
with protective coat
Nylon tie
Fixing device
for reinforced core
Seal fitting
Reinforced core
Fiber with
protective coat
Bracket
Heat shrinkable
fixing sleeve (single)
Heat shrinkable
fixing sleeve (mass)
Grommet
FOST cover
FOST
Nylon tie
Fiber with
protective coat
