EN
2
Accessories
Seal Tape x1
adhesive tape x10
Heat Shrinkable
Protective Sleeve x48
Installation Requirements
To ensure the technical requirements, the following instructions must be
followed:
Fibers with protective coat are fixed with nylon tie at the entrance of FOST.
Grommet should be pressed from inside to outside in order to properly install FOST.
Straight-through and reserved fibers with protective coat should be winded to the fiber holding
tray.
The internal tighteners and fixing nut of reinforced core must be well tightened.
Seal fitting is installed neatly and smoothly.
The heat shrinkable fixing sleeve must be reliable and sealed completely.
