Frymaster LOV M3000 Technical Reference Manual Download Page 31

Page: 31 / 50

LOV

™

Generation II Technical Reference

16. Enter the date using the number buttons 0-9.

17. With the desired selection displayed, press the

yes

) button.

The computer displays

fryer type

on the left and

Elec

on the right.

18. Use the

and

buttons to toggle between

elec

and

gas

19. With the desired selection displayed, press the

yes

) button.

The computer displays

VAT

type

on the left and

SPLIT

on the right.

20. Use the

and

buttons to toggle between

SPLIT

and

FULL

21. With the desired selection displayed, press the

yes

) button.

The computer displays

OIl SYSTEM

on the left and

JIB

on the right.

22. Use the

and

buttons to toggle between

JIB

and

BULK

NOTE:

A JIB system uses a disposable

JIB

(Jug in a Box). A

BULK

system has large storage oil tanks that are connected to the fryer that
fi lls a reservoir.

23. With the desired selection displayed, press the

yes

) button.

The computer displays

LANGUAGE

on the left and

ENGLISH

on the right.

Use the

buttons to scroll and edit any additional fi elds.

24. Press the

(2) button to exit.

The computer displays

SETUP COMPLETE

changing to

off

Summary of Contents for LOV M3000



















































Search results

Summary of Contents for LOV M3000

Reviews:

Frymaster LOV M3000, Technical Reference Manual, Page: 31 / 50

Search results

Summary of Contents for LOV M3000

Reviews: