2-4
PROBLEM
PROBABLE CAUSES
CORRECTIVE ACTION
engaged.
inserted into the fryer and “A” is displayed
on the MIB board.
Controller displays
WAIT
FOR
Filter
,
FILTER
BUSY, CLEAN AND
FILTER
,
DISPOSE
,
DRAIN TO PAN
,
POLISH
,
FILL VAT
FROM BULK
,
FILL
VAT FROM PAN
,
BOIL OUT
,
PAN TO
WASTE
A. Another function is still in
process.
B. MIB has not cleared
checking system.
C.
Messages or errors on other
controllers.
D.
Filter pan not fully
engaged.
A. Wait until the previous function ends to
start another filtration cycle.
B. Wait one minute and try again.
C.
Clear messages and errors on other
controllers.
D.
Ensure the filter pan is in position and
fully inserted into the fryer and “A” is
displayed on the MIB board.
Controller displays
CHANGE FILTER
PAPER?
Filter error has occurred, filter
paper clogged, 25 hour filter
paper change prompt has
occurred or change filter
paper was ignored on a prior
prompt.
Press
(YES), follow prompts and change
the filter paper. Ensure the filter pan has been
removed from the fryer for a minimum of 30
seconds. Do
NOT
ignore
CHANGE
FILTER PAPER
prompts.
Controller displays
INSERT pan
.
A. Normal during Change
Filter Paper routine.
A. Insert pan and press
(CONFIRM)
button.
Controller displays
OIL
IN DRAIN PAN /
CONFIRM
Drain valve open or
possibility that oil is in drain
pan.
Press
(CONFIRM) and follow directions for
FILL VAT FROM DRAIN PAN.
Controller displays
FLT
DYLD
A filter cycle has been
delayed.
This is a normal display when a filter has been
delayed. After the next filter prompt press
YES to filter.
Controller displays
POL
DYLD
A polish cycle has been
delayed.
This is a normal display when a polish has
been delayed. After the next polish prompt
press YES.
Controller displays
CANCEL FILTER?
YES/NO
A filter menu function has
been requested while another
function is in process.
Press YES to keep the desired function in
memory. Once the current function is
complete, the second requested function will
prompt to start. Press NO to cancel requested
function and return to OFF.