manualshive.com logo in svg

Frymaster FilterQuick Version 2, Operation Manual, Page: 26 / 42

Share
Download
Frymaster FilterQuick Version 2 Operation Manual Download Page 26

1-21 

 

 

Left Display 

 

Right Display

 

Action 

 

IS SOLUTION 
REMOVED? 

CONFIRM 

Press arrow under CONFIRM. 

RINSE 
COMPLETE? 

CONFIRM 

Rinse the vat with water and press arrow under CONFIRM. 

VAT AND PAN 
DRY? 

CONFIRM 

Ensure the vat and filter pan are completely dry and press 
arrow under CONFIRM. 

REMOVE 
DISPOSAL PAN 

CONFIRM 

Remove the disposal pan and press arrow under 
CONFIRM. 

INSERT FILTER 
PAN 

 

Insert Filter pan



 

FILL VAT 

CONFIRM 

Fill vat with fresh oil and press arrow under CONFIRM 
when full.  

OFF OFF 

 

 
1.9.12    Clean (Hot [Boil Out] or Cold [Cold Clean (Soak)]) (Dispose to Bulk or Front / 
Fill Vat from Bulk)

 

 

 

Left Display 

 

Right Display

 

Action 

 

Follow steps to Entering Filter Menu Mode on page 1-11. 

WARNING: To prevent injury, ensure adjacent vats that 

contain oil are OFF and covered prior to performing a Clean (Hot [Boil Out] or Cold [Cold Soak]).

 

LEFT 

(Split vats only)

 

RIGHT 

(Split vats 

only)

 

Press appropriate arrow to select side. 

CLEAN 

Press 

. 

BOIL OUT NOW? 

or

 Cold Clean 

Now? 

Yes/no 

Press (YES) arrow to continue.  Press (NO) arrow to cancel and 
return to OFF.   

WASTE TANK 
FULL 

CONFIRM 

If waste tank is full, this message is displayed.  Press button to 
CONFIRM and call waste oil provider. Controller displays OFF. 

IS OIL REMOVED?  YES / NO 

Press (YES) arrow and go to “IS SOLUTION IN THE VAT?”.    
Press (NO) arrow to continue to START DISPOSE. 

START DISPOSE 

 

Press button with blinking LED. 

DRAINING  

None required. If the drain becomes clogged, use the Fryer’s 
Friend to clear the blockage. 

VAT EMPTY AND 
CLEAN? 

CONFIRM 

Press arrow under CONFIRM when empty. 

OPEN DISPOSE 
VALVE 

 

Pull the dispose handle. 

(Note: If using front dispose, ensure 

the wand is connected to the quick disconnect port.  Press 
and hold switch after pulling the dispose handle to dispose 
oil.)

 

DISPOSING 

4:00 countdown timer 

None required. 

REMOVE FILTER 
PAN 

 

Open the door and pull filter pan out of the cabinet. 

IS PAN EMPTY? 

YES / NO 

Ensure the pan is empty and press (YES), otherwise press (NO) 
and follow the prompts (returns to DISPOSING). 

INSERT Filter 
PAN 

 

Insert the pan. 

CLOSE DISPOSE 
valve 

 

Push the dispose handle in.



 

IS SOLUTION IN 
THE VAT? 

CONFIRM 

Ensure solution is in the vat and press arrow under CONFIRM.

 

BOIL OUT 

or

 COLD 

CLEAN 

30:00 

countdown 

timer

 

The timer starts. If hot clean, the vat heats to 195ºF (91 ºC). 

Summary of Contents for FilterQuick Version 2











































Reviews:

No comments