i
WARRANTY STATEMENT
Frymaster, L.L.C. makes the following limited warranties to the original purchaser only for this
equipment and replacement parts:
A. WARRANTY PROVISIONS - FRYERS
1. Frymaster L.L.C. warrants all components against defects in material and workmanship for a
period of one year.
2. All parts, with the exception of the frypot, heating elements and fuses, are warranted for one year
after installation date of fryer.
3. If any parts, except fuses and filter O-rings, become defective during the first year after
installation date, Frymaster will also pay straight-time labor costs to replace the part, plus up to
100 miles/160 km of travel (50 miles/80 km each way).
B. WARRANTY PROVISIONS - FRYPOTS
(Applies to fryers manufactured after December 1, 2003, only.)
1.
Frymaster warrants the frypot assembly for ten years parts and labor. Components attached to
the frypot, such as the high-limit, probe, gaskets, seals, ignitors and related fasteners, are also
covered by the ten-year warranty if replacement is necessitated by the frypot replacement.
Components that are not part of the frypot assembly, such as the blower, gas valve, micro
switches, doors and cabinetry are not covered by the frypot warranty. If the frypot is found to be
defective, Frymaster will replace the frypot, allowing up to the maximum time per the Frymaster
time allowance chart hours of straight-time labor plus up to 100 miles/160 km of travel (50
miles/80 km each way) to change the frypot.
2.
This warranty is limited to fryers operating on natural or propane (LP) gas. Fryers that operate
on manufactured gas (also known as town gas or high-hydrogen gas) have a lifetime frypot
warranty, parts only.
C. WARRANTY PROVISIONS – COMBUSTION CHAMBERS
(Applies to fryers installed on or after November 1, 1994, only.)
1.
Frymaster L.L.C. warrants the combustion chambers against defective material or workmanship
for a period of ten years from the original installation date, parts and labor.
2.
The combustion chamber consists of the infrared burners and the structural components to mount
the burners. This warranty does not cover ancillary components, including the igniter, blower,
high-limit thermostat, and temperature probe.
3.
This warranty is limited to fryers operating on natural or propane (LP) gas.
Summary of Contents for BIPH52 Series
