Frosty Keg KEG6000 Operating Manual Download Page 4

IMPORTANT - All persons that will operate this equipment must read 

and become thoroughly competent with all operating procedures and 
safety precautions. Misuse of this equipment may result in death, 

WARNINGS & DANGER NOTICES

Copyright 2010 DTX International

WARNING:

 Because of inherent dangers from faulty or inferior cords, avoid the use of extension cords. When 

you cannot avoid their use, be sure that the cord is a 3-wire cord with a 3-prong grounded plug. The cord 
should be rated for 

AT LEAST

 1875 Watts and a No. 14 AWG minimum size.

DANGER!

 If you are disposing of this machine, we recommend that you remove the door but leave the shelves 

in to reduce the risk of injury to children. 

DO NOT ALLOW CHILDREN TO BECOME TRAPPED.

ALWAYS 

supervise children when using this product and be sure that children are not playing with the unit.

4

C

 SAFETY PRECAUTIONS, WARNINGS & DANGER NOTICES

2

O

1.

DANGER! 

Carbon dioxide is a potentially dangerous gas. Canisters or cylinders are under pressure and 

proper handling is essential for safety. Familiarize yourself with canister installation and replacement before 
operating this unit. 

HANDLE WITH CARE.

 Never jostle, toss or treat cylinders roughly.

2.
3. Store CO  canisters away from heat or explosive gasses. Keep in a cool, dry space (<70 degrees F) and 

2

chain containers upright to avoid tipping or knocking. Always wear gloves and safety glasses when around 

chemicals.

4. Review and follow instructions for changing CO cylinders. 

NEVER CONNECT A CO CANISTER DIRECTLY 

TO THE UNIT!

 To avoid potential explosion that could result in grave injury or even death, 

ALWAYS 

CONNECT THE CANISTER TO THE CO REGULATOR.

 2 safety valves are located separately; safety valve 

in the regulator and safety valve in the CO  canister. 

DO NOT REMOVE VALVES, DO NOT EXCEED 60PSI.

2

5.

DO NOT ATTEMPT TO REFILL CO CANISTERS!!

 Refills are available where most canisters are sold (see 

page 7 for more information).

 If you experience 

headache or difficulty breathing, a leak may be occurring; open windows and doors to ventilate the area 
and leave immediately.

INTENDED FOR UPRIGHT, FREESTANDING USE ONLY.

 Do not install in cabinet or enclosed spaces. 

LOCATION RECOMMENDATIONS

1.

INDOOR USE ONLY, DO NOT ATTEMPT TO USE OUTDOORS.

2.

3. Get the most out of your kegerator! To maximize efficiency and long life, use near a proper electrical outlet 

and ensure that there is adequate ventilation and clearance around the unit. 

Allow at least 5 inches clear-

ance around all sides of the kegerator

4. Avoid locations where this unit will be in contact with heating elements or direct sunlight.

INTENDED FOR UPRIGHT, FREESTANDING USE ONLY.

 Do not install in cabinet or enclosed spaces. 

.

 

Dimensions:

 

21.3”W x 26.6”D x 33.2”H (with casters)

Summary of Contents for KEG6000
















Reviews: