INSTALLATION AND MAINTENANCE MANUAL
TRANSLATION OF THE
ORIGINAL DOCUMENT
For additional copies visit:
www.frost‐trol.com
LOMOND
SOLID LINES
D007918
Versión:
3
-31-
6-
Place the central backstoper at the fixing point and screw to the central post.
Pay special attention to the mounting position of the central backstoper. The
groove of the central backstopper must fit with the fixed glass.
7-
Finally, screw the central bakcstopper until it is properly fixed.
4.5.
DOORS MAINTENANCE
In order to ensure the proper and easy sliding operation, you must apply every 30
days (or whenever it proves necessary to do so) silicon spray on the door rail
profiles.
Furthermore, check during the weekly cleaning routine that there aren’t any harmful
residues in the sliding rails. Also check that rubber seals are correctly fitted.
The silicon spray used must be suitable for use with foodstuffs.
Silicon lubricant should be applied over the whole length of the sliding rail:
Summary of Contents for LOMOND PI0C008640FDPD17
Page 4: ......
